Viewing page 5 of 98

To inside of Glass Surfaces
1. Wash glass and leave wet.
2. Dip transfer in water a few seconds.
3. Place on glass and smooth out with bond.
4. Roll out air bubbles with squeegee of roller starting in center working in edges.
5. Slide off backing paper.
6. After removing paper wash back of sign to remove all excess adhesive. This will prevent cracking or curling of the signs.

To Wood or Metal Surfaces
1. Dip in water not longer than 10 seconds.
2. Remove and lay face up about 60 seconds.
3. Slide decal off paper onto surface.
4. Smooth down flat with squeegee to remove water and air from under decal and allow to dry.

Manufactured by
3310 Eisten Ave. Chicago 18, 111.
Made in U.S.A.



Please note that the language and terminology used in this collection reflects the context and culture of the time of its creation, and may include culturally sensitive information. As an historical document, its contents may be at odds with contemporary views and terminology. The information within this collection does not reflect the views of the Smithsonian Institution, but is available in its original form to facilitate research. For questions or comments regarding sensitive content, access, and use related to this collection, please contact