Viewing page 7 of 98

This transcription has been completed. Contact us with corrections.

DIRECTIONS FOR APPLYING
To Inside of Glass Surfaces

1. Wash glass leave wet
2. Dip transfer in water a few seconds
3. Place on glass and smooth out with hand.
4. Roll out air bubbles with squeegee or roller starting in center working to edges.
5. Slide off backing paper.
6. After removing paper wash back of sign to remove all excess adhesive.  This will prevent cracking or curling of the signs.

To Wood or Metal Surfaces

1. Dip in water not longer than 10 seconds.
2. Remove and lay face up about 60 seconds.
3. Slide decal off paper on to surface.
4. Smooth down flat with squeegee to remove water and air from under decal and allow to dry.

Manufactured by
CHICAGO DECALCOMANIA CO.
3310 Elston Ave.  Chicago 18, Ill.
Made in U.S.A.

12-58 
41388