This transcription has been completed. Contact us with corrections.
Post-Flight RMS STS-2 anomalies 1. MPM markings- the shoulder MPM markings & the elbow MPM markings can't be lined up simultaneously (need to change one or the other) [[diagram showing how markings can't be aligned simultaneously]] [[2x2 matrix]] [ ⊥ EP ] [ Τ ] (need SY) [ ] [ ⊥ SP ] [ Τ ] [[/diagram showing how markings can't be aligned simultaneously]] 2. C&W annunciator bulbs "popped out" during launch [which ones? Any problems?] 3. Elbow & wrist cameras failed - a common cb popped, apparently during pan/tilt of elbow camera. [cb was reset, stayed in, popped when elbow was panned] R15:E PORT RMS TV [[bracket above these three words] CAMR/PAN-TILT (probably could have reset & used wrist) 4. DAC - 2 things looked funny: [[circled]]1[[/circled]] LOW/AFT DAC lost the "RUN" light (but did not show an end of film) toward the middle of group 1 [[circled]]2[[/circled]] MID/AFT DAC showed an End of Film at the very end of group 1 5. SY joint: drove all other joints in B/U, then switched to SY. Tried several times - didn't drive. Might have driven another joint in B/U, maybe not....
Transcription Notes:
redid the diagram - couldn't find a T symbol sans serif