Viewing page 40 of 250

This transcription has been completed. Contact us with corrections.

Jay Lengendre- set up mtg tomorrow & talk about SES, and tour cockpit. 16/1026 (0900)

RCS/DAP : John Karl CGG

REM redesign ideas (Kelso, McNau, Kain, Johnson)
(try to complement these for. FUR 131 to test them)
1.switches [[?]] on IECM, not REM, and in following places:
(a) 1 on the bottom of each "foot" (3) (this tells you when you're hit in Z & are level)
(b) 1 on "forward" wall, so you know when you're contacted 1st constraining surface in X (have it be in centre of wall, so IECM must be "flush" to have it made)
(c) 1 on side wall of IECM, to be made when final constraining [[?]] surface is contacted [total of 5 uswithes] 

2. Have a supporting "rail", or raise the existing REM rails - so IECM can't topple over or jump the rails

3. Fix 1/8" clearance (redesign "hook"? Move entire latch assembly? Enlarge REM baseplate? Present redesign to entire community; engage telecon to input ideas (McNain; Davis)