Viewing page 94 of 204

This transcription has been completed. Contact us with corrections.

•252°-->300° pitting noted on tang
surface (<.005") [no burnishing previously on this segment - would probably be in paperwork .... might have had some work done @ MTI] (this is fairly common)[use shim stock]

•R aft center segment left outside bec. of req. of only 1 seg inside at once. Rained. Cleaned out H2O, dried off insulation.

•2 O-ring bags were rejected at KSC

•talk to technician who observed mating operation.

MOSER, LEE, LITTLES

smoke ~.5 sec --> ~4 sec some photos may indicate smoke lasts until ~12 sec (not verified)

plume: 45° ± 10°(~315° ± 10°)
    joint ± 1 ft