Viewing page 34 of 208

This transcription has been completed. Contact us with corrections.

P/TV09
KIDSAT
P/TV09 KIDSAT
SCENE SYNOPSIS
Scene includes First Session (Pre-Docking) and Second Session (Post Separation)
Scene conatins H/W setup for data collection and desired in-cabin photographic scenes
Document OPS w/orbiter ESC
KidSat lens changeout from 50mm to 85mm prior to Second Session (Post Separation)
FLIGHT PLAN CALLOUT: SETUP
1. ESC Unstow/Initial Batt Charge
a. Unstow ESC, AC/DC Pwr Converter, AC Pwr Cable, additional PCMCIA cards, lenses
ESC b. ESC Pwr - OFF
Connect AC/DC Pwr Converter ESC cable to J1 on ESC
Connect opposite end of AC/DC Pwr Converter to AC Pwr Cable
A15 c. AC UTIL PWR - OFF
d. AC UTIL PWR - ON
NOTE
Batt will be fully charged in 30 min regardless of indication
ESC BATT segments - Flashing/sequencing
2. KidSat PGSC C/O
KidSat PGSC setup per NETWORK SETUP DIAGRAM (ORB OPS, PGSC)
3. Install Camr Brkt
W7 a. Unstow, install ovhd brkt, tabs (two) to stbd, bolts (two) to port
b. Tighten brkt bolts (two)
c. Set brkt angle to 0° in roll (Nadir viewing)

Figure 16: Procedures flown on the mission and used by the crew to set up and operate the KidSat system (1 of 5).