Viewing page 87 of 272

This transcription has been completed. Contact us with corrections.

BERNSTEIN BROS. SHEET METAL SPECIALTIES, Inc.
Designers - Fabricators
41-18 24th STREET   ST 6-0700
Long Island City, N. Y. 11101

STAINLESS STEEL WALL UNITS

The sculpture is composed for four (4) units mounted on the wall.  Each unit consists of a housing and side panels.

The housing is made of #16ga. Stainless Steel Type 304 polished #3, 34"x34"x34", with the top, front and bottom fabricated from one sheet. Internal bracing to prevent sagging when mounted is made from 1"x1"x1/8" Stainless Steel angle Type #304 polished #3 fabricated in such a manner as to provide hanger space and side panel space.

Side panels are 1" plastic sheets in colors chosen for effect. These Panels are inserted into the housing between the rear panel and the side returns on the main housing.

Galvanized iron brackets fabricated to provide a hold for the rear panel is fastened to the wall with steel hardware for strength.

Stainless Steel was chosen for this sculpture to utilize its beauty, long life, ease of fabrication, and finishing properties.

When installed, this sculpture shows no visible work marks, hangers, or brackets to detract from its beauty.

CUSTOM PRODUCTIONS FOR INDUSTRY