Viewing page 88 of 272

This transcription has been completed. Contact us with corrections.

BERNSTEIN BROS. SHEET METAL SPECIALTIES, Inc.
Designers - Fabricators
41-18 24th STREET   ST 6-0700
Long Island City, N. Y. 11101

STAINLESS STEEL STACK

The sculpture is composed of ten (10) units mounted on the wall. Each unit consists of a housing and top and bottom plastic panels.

The housing is fabricate of #18ga. Stainless Steel #3 polish, 40"x30"x9", with the front and right and left sides fabricated from 1 sheet. Internal bracing, of #26ga. Stainless Steel is shaped the same as the outer housing with room for the acrylic plastic panels to be inserted. Rear of the housing is a panel of #16ga. Stainless Steel fabricated in such a manner as to provide room for hardware and mounting brackets.

Top and bottom panels are 1/4" acrylic plastic in color chosen for effect. These panels are inserted into the housing between the inner and outer housing.

Galvanized iron brackets, bent into offset shape to provide space for rear panel to catch is fastened to the wall with steel hardware.

Stainless Steel was chosen for this sculpture for its beauty, ease of fabrication finishing and long life.

When installed, one unit above the other, spaced as desired, approximately 9", no hardware, brackets, or braces are visible to mar the finished appearance.

CUSTOM PRODUCTIONS FOR INDUSTRY